Pac-Man Front Art
Pac-Man, Restorations December 15th, 2006I finished redrawing the front art:
I am very close to running out of things to do on this at the moment. It’s too cold to paint, and I’m not ready for that yet anyway. I still need to get the silkscreening supplies, paint, etc… I may clean up the wiring harness and power supply board next.
December 15th, 2006 at 12:52 pm
I’m really excited to see the progress on this once you start painting (I know you won’t be able to start for a while, but getting these stencils done was a huge task and you finished in record time).
I think it’s great that you’re paying such close attention to detail, and plan on doing such an accurate restoration. I’m sure your pac-man is going to be perfect when you’re done.
December 16th, 2006 at 1:23 am
Thanks for the encouragement!
January 8th, 2007 at 12:03 am
What about using the artwork at one of the Arcade Art sites printed on vinyl instead of painting the graphic back on. Wouldn’t that be easier?
January 8th, 2007 at 4:40 am
Hi Aaron,
Thanks for checking out my site and for commenting.
I thought about buying the side art stickers from TwoBits.com / Pac-Man.com. I decided against it partly because they are $300, and because I read a few bad reviews about the color. The cabinet looks so good when its painted and I want to make sure I can make it look as original as possible.
I’m not sure how I would make my own of vinyl. Are there printing places for that?
I’m going to use stencils for the red and blue, and silkscreen the black on top. I’m hoping it will look original, but if it doesn’t I will probably end up just buying those vinyl stickers anyway, or stencils.
February 26th, 2007 at 5:10 pm
I saw this tutorial online about making your own silkscreen, and thought of this project (since I’m going to be in the same boat soon, I may take a stab at this):
http://www.usscatastrophe.com/zettwoch/silkscreen.html
Seems like you could make your own custom frame to the correct size, print out the black section on tons of those transparency sheets, and use a standard shop light to provide the needed light for the project. If I try it, I’ll let you know how it goes (it would be quite a while before I would try it though, I’m not as close as you to painting my pac-man).
February 26th, 2007 at 9:05 pm
Hey Mark - thanks! I had a company that was going to make me one and the guy won’t get back to me now. I may make my own. If I do, I may try the front art first as its a smaller area, and probably a good way to get used to it before going large scale.
December 31st, 2007 at 7:36 pm
Did you end up making any more progress on your cabinet? Did you end up stenciling it? Making your own…or buying stickers?
January 1st, 2008 at 1:49 pm
Hi Jeff,
I haven’t made any more progress on it. I was dead set against the TwoBits repro art because it wasn’t the right shade of yellow, and was inaccurate. The left and right sides were mirrored, which is not how it’s supposed to be. I recently saw a thread where someone posted pics of their Pac-Man restoration using TwoBits art, and it actually looked great. I think they must have redone their art because it’s a night and day difference. You can see that here:
http://www.dragonslairfans.com/smfor/index.php?topic=195.0
I’m now considering just buying their repro art to finish it. I am also thinking of buying a plotter to cut and make my own stencils but not sure if I’ll get to it any time soon.